decorative vanity sinks
will be the absolute most common. Mounted in to a hole cut in the worktop, the rim of the sink and draining are slightly raised and overlap the worktop.
Corner sinks tend to be inset and have a draining board positioned at the proper angle to the sink. Perfect for small kitchens or utility rooms.
Under-mounted sinks are fitted underneath the worktop. They’re not suited to laminate worktops whilst the sink hole reveals the unfinished edges of the worktop. They work nicely with solid surface materials, such as for example stone, as you will have grooves cut into the task surface to supply a location for draining.
Over-mounted sinks directly plus a base unit and the waste pipe is plumbed through the worktop.
Belfast and butler sinks are large, straight-sided and ceramic. The front of the sink is generally exposed, but they could be under-mounted or raised to take a seat on the worktop. The difference between Belfast and butler sinks is that Belfast sinks have an integrated overflow, whereas butler’s sinks do not.
Kitchen workstations are freestanding sink units. The sink section often white ceramic but sometimes metal sits directly plus a base unit for decorative vanity sinks
Stainless provides the best array of styles and sizes. Prices vary in terms of the grade of steel used. Stainless-steel is strong, but relatively lightweight, durable, hygienic, heat and stain resistant and easy to clean with detergent, but the most truly effective can scratch easily.
Ceramic sinks are produced from kiln-fired porcelain or fireclay. They’re chemical, stain and heat resistant but can chip or crack if heavy things are dropped on them. Clean them with a non-abrasive cleaner and dry after use to stop lime scale build-up.
Solid surfaces such as for example Corian look super-sleek as sinks might be seamlessly under-mounted, without joins between them and the worktop. Sinks that combine a stainless-steel base with solid Corian will also be available. Solid surfaces are easy to completely clean with warm soapy water. They’re also durable and heat, impact and stain resistant and surface scratches may be erased with fine sandpaper.
Questions to consider
Double or single bowl? Most kitchens take advantage of having a 1.5, or perhaps a bowl-and-a-half sink. In case that you entertain a lot and have space, a dual as well as two and a half bowls are useful.
Sink or worktops tap holes? Some sinks have a predrilled hole for a mixer tap. If they do not really, taps must be fitted by drilling the required holes to the worktop.
Would it be a DIY or professional job? You can fit a sink when you yourself have some plumbing know-how. A plumber will charge £80 to £100 to displace new for old and about £250 if you wish to reposition the brand new sink.
Good to learn never put a washing-up bowl in a ceramic sink – any grit under the bowl will mark the surface for decorative vanity sinks