Stainless Kitchen Sinks
will be the absolute most common. Mounted in to a hole cut in the worktop, the rim of the sink and draining are slightly raised and overlap the worktop.
Corner sinks usually are inset and have a draining board positioned at the right angle to the sink. Well suited for small kitchens or utility rooms.
Under-mounted sinks are fitted under the worktop. They’re not suitable for laminate worktops whilst the sink hole reveals the unfinished edges of the worktop. They work nicely with solid surface materials, such as for example stone, as you should have grooves cut into the job surface to provide a place for draining.
Over-mounted sinks directly plus a base unit and the waste pipe is plumbed through the worktop.
Belfast and butler sinks are large, straight-sided and ceramic. The front of the sink is generally exposed, but they may be under-mounted or raised to lay on the worktop. The difference between Belfast and butler sinks is that Belfast sinks have an integrated overflow, whereas butler’s sinks do not.
Kitchen workstations are freestanding sink units. The sink section often white ceramic but sometimes metal sits directly and also a base unit for Stainless Kitchen Sinks
Metal provides the best array of styles and sizes. Prices vary with regards to the grade of steel used. Stainless-steel is strong, but relatively lightweight, durable, hygienic, heat and stain resistant and easy to clean with detergent, but the utmost effective can scratch easily.
Ceramic sinks are produced from kiln-fired porcelain or fireclay. They’re chemical, stain and heat resistant but can chip or crack if heavy things are dropped on them. Clean them with a non-abrasive cleaner and dry after use to stop lime scale build-up.
Solid surfaces such as for instance Corian look super-sleek as sinks may be seamlessly under-mounted, without joins between them and the worktop. Sinks that combine a stainless-steel base with solid Corian are also available. Solid surfaces are easy to completely clean with warm soapy water. They’re also durable and heat, impact and stain resistant and surface scratches may be erased with fine sandpaper.
Questions to take into consideration
Double or single bowl? Most kitchens take advantage of having a 1.5, or perhaps a bowl-and-a-half sink. In the event that you entertain a whole lot and have space, a double as well as two and a half bowls are useful.
Sink or worktops tap holes? Some sinks have a predrilled hole for a mixer tap. If they don’t really, taps must certanly be fitted by drilling the necessary holes to the worktop.
Could it be a DIY or professional job? You are able to fit a sink when you have some plumbing know-how. A plumber will charge £80 to £100 to displace new for old and about £250 if you intend to reposition the newest sink.
Good to learn never put a washing-up bowl in a ceramic sink – any grit beneath the bowl will mark the surface for Stainless Kitchen Sinks