Undermount Stainless Sink
would be the absolute most common. Mounted into a hole cut in the worktop, the rim of the sink and draining are slightly raised and overlap the worktop.
Corner sinks tend to be inset and have a draining board positioned at the right angle to the sink. Suitable for small kitchens or utility rooms.
Under-mounted sinks are fitted underneath the worktop. They’re not suitable for laminate worktops whilst the sink hole reveals the unfinished edges of the worktop. They work nicely with solid surface materials, such as for instance stone, as you’ll have grooves cut into the job surface to provide an area for draining.
Over-mounted sinks directly plus a base unit and the waste pipe is plumbed through the worktop.
Belfast and butler sinks are large, straight-sided and ceramic. The leading of the sink is generally exposed, but they may be under-mounted or raised to lay on the worktop. The difference between Belfast and butler sinks is that Belfast sinks have an integral overflow, whereas butler’s sinks do not.
Kitchen workstations are freestanding sink units. The sink section often white ceramic but sometimes metal sits directly along with a base unit for Undermount Stainless Sink
Stainless provides the greatest array of styles and sizes. Prices vary with regards to the grade of steel used. Stainless-steel is strong, but relatively lightweight, durable, hygienic, heat and stain resistant and easy to wash with detergent, but the most truly effective can scratch easily.
Ceramic sinks are produced from kiln-fired porcelain or fireclay. They’re chemical, stain and heat resistant but can chip or crack if heavy things are dropped on them. Clean them with a non-abrasive cleaner and dry after use to prevent lime scale build-up.
Solid surfaces such as for instance Corian look super-sleek as sinks may be seamlessly under-mounted, without any joins between them and the worktop. Sinks that combine a stainless-steel base with solid Corian may also be available. Solid surfaces are easy to completely clean with warm soapy water. They’re also durable and heat, impact and stain resistant and surface scratches might be erased with fine sandpaper.
Questions to consider
Double or single bowl? Most kitchens take advantage of having a 1.5, or even a bowl-and-a-half sink. In case that you entertain a whole lot and have space, a double as well as two and a half bowls are useful.
Sink or worktops tap holes? Some sinks have a predrilled hole for a mixer tap. If they don’t really, taps must be fitted by drilling the mandatory holes to the worktop.
Can it be a DIY or professional job? You are able to fit a sink if you have some plumbing know-how. A plumber will charge £80 to £100 to displace new for old and about £250 if you want to reposition the brand new sink.
Good to know never put a washing-up bowl in a ceramic sink – any grit beneath the bowl will mark the surface for Undermount Stainless Sink